Spokane Valley Hot Tub Repair Pros
27 S McDonald Rd
Spokane Valley, WA 99216, United States
MQ4C+FR Spokane Valley, Washington, USA
(509) 331-7524
https://hottubrepairspokanewa.com/hot-tub-repair-spokane-valley-wa/
Spa Repair Spokane Valley
When you take care of your spa, you could require to solve any leaks at some point. A spa is not likely to leak, however it’s not impossible to leak. There are many parts of the tub that can cause leaks, like the heater assembly manifold, the seal at the end of the pump and jet bodies, the PVC plumbing parts and tubing Slice as well as gate valves as well as other tub components. The first thing to take if you notice that your hot tub has leaks is to address it.
Problems with water leaks and discolorations happen the most within filter housings. Discoloration usually happens when an old hot tub leaks water that isn’t clean, making the tub look bad. It is possible to damage the tub even if you do nothing to stop a leak from the home but you shouldn’t do it with discoloration.
Discoloration on the filter housing is a common phenomenon that isn’t something you can do right now. You can only be aware that it’s going on. In time, it’ll get brittle and simple to break, so it will not last very long. If it doesn’t become a problem and isn’t in the public eye, don’t even think about it.
All things, including the housing won’t be hurt by this discoloration. It’s just natural discoloration over a period of more than 10 years of use. As long as it is functional there’s no need to worry about it.
How can you fix a leaky filter housing in a spa?
If you don’t know how to proceed, an issue with your hot tub’s housing is a very unpleasant experience. The best solution is to contact an expert in tub repair.
If there is leakage between the housing of your filter and the tub shell, the best way to stop it is to take out a portion of the water inside the tub to ensure it’s not beneath the filter. A good silicone sealant can aid in sealing all the spaces between your tub’s shell and the housing of your filter. You can seal them all with caulk.
Make sure you push the sealant into the gaps with your finger or caulking tool for good penetration and let it dry for a bit before filling them. Filter housing leaks can cause an issue with plumbing or even cause damage to the housing if you try to remove it in the future, so be careful when you are doing this. That’s why you need to pay attention.
Take care not to put too much strain on the filter housing system. When there’s lots of strain on the housing, the O-ring becomes stuck in the housing of the filter. A large channel lock or a strap wrench should be capable of getting the task done. But you don’t want to damage the filter head because you do not want to go too slow. Take your time while doing your work.
